Introduction

The adjustment of your wattage and temperature control (TC) can help you achieve the best sub-ohm vaping experience of your life. The settings used can cause dry hits, burnt coils, unutilized e-liquid. Here at Britaces UK, we can assist you to comprehend what to do in order to configure your mod power settings enabling chromey sour flavorful rendezvousings- securely and cost-effectively.

What is the meaning of Sub-Ohm Wattage?

Lower resistance sub ohm coils (less than 1.0 O) need a greater wattage to properly vaporize high VG e-liquids. The general wattage range is:

Make sure you get it going low then yank it to the high end otherwise the coil will burn. The majority of sub ohm wattage guide types suggest certifying the rating of coils on a package.

The advantages of Temperature Control (TC) Vaping

TC vaping gives you an option of a top temperature limit rather than a watt limit. It's ideal for:

Preventing dry hits

• Improving coil longevity
  
• Consistent flavour

Optical performance is finest using Ni200 (nickel), titanium or stainless steel coils

Common Temperature Ranges:

• 200degF - 600degF (93degC - 315degC)

Aim your TC mod depending on coil material and desired warmth of the vapour. When in doubt, select wattage mode until you have learned the TC settings.

How to optimise your settings

• Get an Ohm Reader: It should have been checked that the resistance of your coil is limited before the power is adjusted.
  
• Stay Within Coil Specs: the range is recommended by the manufacturer.
  
• Prime Your Coils: You needs to vape your coil first in e-liquid.
  
• Add Little at a Time: Improve conditions by adding wattage little by little to discover your optimum setting.
  
• Match VG Ratio- High wattage vaping requires high VG e-liquids
  

How to prevent Coil burnout: Safety First

Not burning coils is not only about flavour, it is also about safety. Make sure that the coil is not being overpowered. Look at signs of burnt coil such as:

• Harsh hits
  
• Burnt cotton smell
  
• Reduced vapour production
  
• Take off your coil when this happens.
  
• Recommended TC Mods at Britaces UK.

Want to test power levels or TC mode? View the range of TC mods with in-built safety, adjustable switching profiles and fine wattage adjustment of the collection of Explore Britaces.

Summary

Using your sub-ohm wattage settings means having more best flavour, great clouds, and longer coils. Pick your favourite wattage or get a more high-tech technology where you control all the levels in the temperature, either way, knowing your device inside out will provide you with an advantage in vape personalisation.

Begin to fool with your Britaces mod--prudently and safely.

FAQs

1.Which wattage are the good things to use on sub-ohm coils?

It is also dependent on the coil resistance. In all cases consult the recommended range of coil.

2.Is sub-ohm vaping something that requires temp control?

TC may help to avoid dry hits and increase coil life, although not necessarily.

3.Does more wattage help with clouds?

Yes, though only because your coil and e-liquid will permit it.

4.Am I going to break any of my coils using the wrong wattage?

Yes, it can be damaged by running it too high, and may burn any coils attached to it.

5.Which is less risky wattage or temp mode?

The two are safe as long as they are used properly. TC mode provides additional dry prohibited defense.

6.How will I know that my settings are correct?

The good signs are smooth draw, good flavour and no burnt taste.